Register now for better personalized quote!

HOT NEWS

Huawei S5735-L24P4S-A-V2 Datasheet

Oct, 09, 2026 Hi-network.com

The S5735-L24P4S-A-V2 has the Huawei part number 98012021 and supports software version V600R022C01 and later compatible releases. Its 24 copper Ethernet ports support 10/100/1000 Mbit/s connections, while four 1000BASE-X SFP ports provide Gigabit optical or compatible uplink connectivity. This combination helps organizations connect end devices and integrate the switch into a larger network infrastructure.


Key Features of S5735-L24P4S-A-V2

24 Gigabit PoE+ Access Ports

The 24 Ethernet ports support 10/100/1000BASE-T connectivity and PoE+. The built-in power module provides 400 W of PoE power, enough to supply full power to 24 IEEE 802.3af ports or 13 IEEE 802.3at ports. This simplifies network installations by allowing compatible devices to receive both data and electrical power through Ethernet cables.


Four Gigabit SFP Uplink Ports

Four 1000BASE-X SFP ports support data transmission at 1000 Mbit/s. Compatible GE SFP optical modules and copper modules can be selected according to network distance and cabling requirements. Certain 10GE SFP+ modules and cables are supported only for stacking connections, so compatibility should be checked before installation.


Built-In Cooling and AC Power

The switch uses an integrated AC power module and two built-in fans. Air enters through the left side and front panel and exits through the right side. Its intelligent fan speed adjustment helps manage cooling according to operating conditions. The power module is not pluggable, and redundant power supply is not supported.


Installation and Deployment Considerations

The S5735-L24P4S-A-V2 is suitable for office networks, campus access environments, and deployments that require PoE-powered devices. Before installation, administrators should confirm the total power requirements of connected equipment, select compatible SFP modules, and provide adequate airflow around the chassis. The switch also includes a console port for on-site configuration and a PNP button for reset operations. Holding the PNP button for at least six seconds restores factory settings and resets the switch, which may interrupt services.


S5735-L24P4S-A-V2 Datasheet

Download Datasheet: Huawei CloudEngine S5735-L24P4S-A-V2 Datasheet.pdf

For more datasheets, please go to the Download tab on each product details page, or search at Datasheet Download Center.


Huawei CloudEngine S5735 Series Switches

Huawei All Series Switches New and Used

For Huawei product list and quote, please visit: https://www.hi-network.com/categories/huawei or contact us at www.hi-network.com  (Email: info@hi-network.com)



S5735-L24P4S-A-V2 (98012021)

Overview

Table 4-379 Basic information about the S5735-L24P4S-A-V2
ItemDetails
DescriptionS5735-L24P4S-A-V2 (24*10/100/1000BASE-T ports, 4*GE SFP ports, PoE+, AC power)
Part Number98012021
ModelS5735-L24P4S-A-V2
First supported versionV600R022C01

Components

Figure 4-121 S5735-L24P4S-A-V2 appearance

1

One MODE button

2

Twenty-four 10/100/1000BASE-T PoE+ ports

3

Four 1000BASE-X ports

4

One console port

5

One PNP button

NOTICE:

To restore the factory settings and reset the switch, hold down the button for at least 6 seconds.

To reset the switch, press the button.

Resetting the switch will cause service interruption. Exercise caution when you press the PNP button.

6

Ground screw

NOTE:
It is used with a ground cable.

7

Jack for AC power cable locking strap

NOTE:
The AC power cable locking strap is not delivered with the switch.

8

AC socket

NOTE:

It is used with an AC power cable.

Ports

Table 4-380 Ports on the S5735-L24P4S-A-V2
PortConnector TypeDescriptionAvailable Components
10/100/1000BASE-T portRJ45A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s.

Ethernet cable

1000BASE-X portSFPA 1000BASE-X port can send and receive data at 1000 Mbit/s.
  • GE eSFP optical modules

  • GE-CWDM eSFP optical modules

  • GE-DWDM eSFP optical modules

  • GE SFP copper module

  • 10GE SFP+ optical modules (only used for stack connection)

  • 10GE-CWDM SFP+ optical modules (only used for stack connection)

  • 10GE-DWDM SFP+ optical modules (only used for stack connection)

  • 1 m and 3 m SFP+ high-speed copper cables (only used for stack connection)

  • 10 m SFP+ AOC cables (only used for stack connection)

  • 0.5 m and 1.5 m SFP+ dedicated stack cables (only used for stack connection; zero-configuration stacking supported from V600R023C00)

  • 3 m SFP+ dedicated stack cable (V600R025C10 and later versions, only for zero-configuration stacking)

Console portRJ45The console port is connected to a console for on-site configuration.

Console cable

Indicators and Buttons

The S5735-L24P4S-A-V2 has similar indicators to those on the S5735-L8P2T4X-A-V2. For details, see the S5735-L8P2T4X-A-V2.

Power Supply System

The switch has a built-in AC power module and does not support pluggable power modules. The built-in power module can provide 400 W PoE power, which ensures full PoE power on 24 ports in compliance with 802.3af or on 13 ports in compliance with 802.3at.

Heat Dissipation System

The switch has two built-in fans for forced air cooling. Air flows in from the left side and front panel, and exhausts from the right side.

When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.

This figure only shows the airflow direction and does not depict the actual device.

Technical Specifications

Table 4-381 Technical specifications of the S5735-L24P4S-A-V2
ItemSpecification
Dimensions without packaging (H x W x D) [mm (in.)]

Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.)

Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.)

Dimensions with packaging (H x W x D) [mm (in.)]90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.)
Chassis height [U]1 U
Chassis materialMetal
Weight without packaging [kg (lb)]2.92 kg (6.44 lb)
Weight with packaging [kg (lb)]3.79 kg (8.36 lb)
Typical power consumption [W]36.32 W
Typical heat dissipation [BTU/hour]123.93 BTU/hour
Maximum power consumption [W]
  • Without PoE: 43.35 W

  • Full PoE load: 484.91 W (PoE: 400 W)

Maximum heat dissipation [BTU/hour]
  • Without PoE: 147.91

  • Full PoE load: 1654.56

Static power consumption [W]27.07 W
MTBF [years]60.18 years
Availability> 0.99999
Noise at normal temperature (acoustic power) [dB(A)]49.3 dB(A)
Noise at normal temperature (acoustic pressure) [dB(A)]37.3 dB(A)
Number of card slots0
Number of power slots0
Number of fans modules2
Redundant power supplyNot supported
Long-term operating temperature [°C (°F)]-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.)
Restriction on the operating temperature variation rate [°C (°F)]

When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Devices cannot start when the temperature is lower than 0°C (32°F).

Storage temperature [°C (°F)]–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]5% RH to 95% RH, non-condensing
Long-term operating altitude [m (ft.)]0–5000 m (0–16404 ft.)
Storage altitude [m (ft.)]0-5000 m (0-16404 ft.)
Power supply modeAC built-in
Rated input voltage [V]
  • AC input: 100 V AC to 240 V AC, 50/60 Hz

  • High-voltage DC input: 240 V DC

Input voltage range [V]
  • AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz

  • High-voltage DC input: 190 V DC to 290 V DC

Maximum input current [A]6 A
Memory2 GB
Flash memoryPhysical space: 1 GB
Console portRJ45
Eth Management portNot supported
USBNot supported
RTCNot supported
RPS inputNot supported
Service port surge protection [kV]Common mode: ±7 kV
Power supply surge protection [kV]Differential mode: ±6 kV; common mode: ±6 kV
Ingress protection levelIP20
Types of fansBuilt-in
Heat dissipation modeAir cooling for heat dissipation, intelligent fan speed adjustment
Airflow directionAir intake from left and front, air exhaustion from right
PoESupported
Certification

EMC certification

Safety certification

Manufacturing certification


tag-icon Hot Tags : Huawei Switches datasheet

Copyright © 2014-2024 Hi-Network.com | HAILIAN TECHNOLOGY CO., LIMITED | All Rights Reserved.
Our company's operations and information are independent of the manufacturers' positions, nor a part of any listed trademarks company.