Register now for better personalized quote!
The Huawei S5735-L48T4S-A-V2 is a high-performance Gigabit Ethernet switch designed to meet the growing demands of modern enterprises. It belongs to the Huawei CloudEngine S5735-L series, providing enhanced Layer 3 features, robust security, high-density ports, and energy-efficient performance. This switch is ideal for campus networks, small to medium-sized enterprises, and distributed office environments.
The S5735-L48T4S-A-V2 comes in a sleek, rack-mountable chassis that offers durability and optimized airflow. With fan-based cooling, it ensures stable operation even under high workloads. The device's front-panel design allows for easy access to ports and LEDs, making installation and troubleshooting straightforward.
Below are the critical specifications of the S5735-L48T4S-A-V2:
▪ Ports: 48 x 10/100/1000BASE-T Ethernet ports, 4 x 10GE SFP+ uplink ports
▪ Forwarding Performance: 132 Mpps
▪ Switching Capacity: 176 Gbps
▪ MAC Address Table: 32,000 entries
▪ VLAN Support: 4,000 VLANs
▪ Power Supply: AC power input with built-in PSU
▪ PoE Capability: Not supported on this model
▪ Stacking: Supports virtual stacking (iStack)
▪ Dimensions: 442 mm × 420 mm × 44.4 mm (1U)
▪ Weight: Approximately 5.4 kg
▪ Advanced Layer 3 features including OSPF, RIP, and static routing
▪ Intelligent traffic management with QoS and ACL policies
▪ Energy-efficient design with low power consumption
▪ High port density supporting large-scale deployments
▪ Virtual stacking for simplified management and scalability
▪ Strong security with MAC authentication, 802.1X, and ARP protection
▪ Easy device management with SNMP, web UI, and command-line options
▪ IPv6 support ensuring future-proof network investment
With its non-blocking architecture and forwarding performance of 132 Mpps, the S5735-L48T4S-A-V2 can handle high-traffic environments without packet loss. The 176 Gbps switching capacity ensures smooth handling of large-scale enterprise traffic. Its efficient chipset design contributes to energy savings, lowering operational costs for businesses.
The S5735-L48T4S-A-V2 is versatile and can be deployed in various environments:
▪ Campus networks requiring high-density access switches
▪ Medium-sized enterprise cores for Layer 3 aggregation
▪ Branch offices needing reliable connectivity
▪ Government and education institutions with large user bases
Security is at the heart of enterprise networking. The switch provides features such as:
▪ Access Control: 802.1X authentication, MAC authentication, and portal authentication
▪ Attack Prevention: ARP protection, DHCP snooping, and broadcast suppression
▪ Policy Enforcement: Flexible ACLs for granular traffic control
Designed with environmental considerations in mind, the switch features:
▪ Low Power Consumption: Hardware optimization for reduced energy usage
▪ Intelligent Fan Control: Adjusts cooling speed based on temperature
▪ Energy-Efficient Ethernet (EEE): Conserves energy during low traffic periods
Administrators can manage the device using:
▪ Command Line Interface (CLI) for advanced configuration
▪ Web-based GUI for intuitive management
▪ SNMP for integration with network management systems
▪ NETCONF/YANG for automated and programmable operations
Huawei’s iStack technology allows multiple switches to operate as a single logical device. This reduces management complexity and increases scalability. With virtual stacking, enterprises can expand network capacity without sacrificing ease of management.
The S5735-L48T4S-A-V2 stands out compared to its counterparts:
▪ Compared to smaller models like the S5735-L24T4S-A, it provides higher port density.
▪ Unlike PoE models, it does not provide power to endpoints but benefits from reduced cost and energy consumption.
▪ Its robust Layer 3 capabilities make it more advanced than entry-level access switches.
The switch ensures uninterrupted operations with:
▪ Redundant fans and power design for stable performance
▪ Storm control to protect against broadcast, multicast, and unicast storms
▪ Link aggregation for redundancy and improved throughput
Some typical enterprise use cases include:
▪ Connecting large numbers of employees in campus environments
▪ Supporting IP surveillance and large-volume data transmission
▪ Providing reliable Layer 3 aggregation in distributed offices
▪ Building secure departmental networks in universities or government sectors
Enterprises selecting this model benefit from:
▪ High-performance switching with enterprise-grade features
▪ Simplified operations with intuitive management options
▪ Scalability through stacking and VLAN support
▪ Long-term investment protection with IPv6 readiness
No, this model does not support Power over Ethernet (PoE). Huawei offers other models with PoE functionality for powering IP phones and cameras.
Yes, the S5735-L48T4S-A-V2 supports iStack technology, which allows stacking with other compatible switches in the same series.
Yes, it is suitable for small to medium-sized enterprises, especially for environments that require high port density and Layer 3 features.
The switch operates with AC power input and comes with a built-in power supply unit, ensuring stability and reliability.
Yes, the device fully supports IPv6 features, making it future-proof for modern networking environments.
The switch can support up to 4,000 VLANs, making it highly scalable for large organizations.
The S5735-L48T4S-A-V2 is a robust, reliable, and scalable switch designed for enterprises seeking high performance and flexibility in their network infrastructure. With its advanced Layer 3 features, energy efficiency, and strong security, it serves as a future-ready solution for growing business networks. Whether deployed in campuses, offices, or government institutions, this model stands out as a cost-effective and dependable choice.
Huawei CloudEngine S5735-L48T4S-A-V2 (98012033) Switch
Huawei All Series Switches New and Used
For Huawei product list and quote, please visit: https://www.hi-network.com/categories/huawei or contact us at www.hi-network.com (Email: [email protected])
| Item | Details |
|---|---|
| Description | S5735-L48T4S-A-V2 (48*10/100/1000BASE-T ports, 4*GE SFP ports, AC power) |
| Part Number | 98012033 |
| Model | S5735-L48T4S-A-V2 |
| First supported version | V600R022C01 |
1 | Forty-eight 10/100/1000BASE-T ports | 2 | Four 1000BASE-X ports |
3 | One console port | 4 | One MODE button |
5 | One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. | 6 | Ground screw NOTE: It is used with a ground cable. |
7 | Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch. | 8 | AC socket NOTE: It is used with an AC power cable. |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. | Ethernet cable |
| 1000BASE-X port | SFP | A 1000BASE-X port can send and receive data at 1000 Mbit/s. |
|
| Console port | RJ45 | The console port is connected to a console for on-site configuration. | Console cable |
The S5735-L48T4S-A-V2 has similar indicators to those on the S5735-L48P4XE-A-V2 except that the S5735-L48T4S-A-V2 does not have a PoE mode indicator. For details, see the S5735-L48P4XE-A-V2.
The switch has a built-in AC power module and does not support pluggable power modules.
The switch has a built-in fan for forced air cooling. Air flows in from the left side, and exhausts from the right side.
When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.
This figure only shows the airflow direction and does not depict the actual device.
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] | Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.) |
| Chassis height [U] | 1 U |
| Chassis material | Metal |
| Weight without packaging [kg(lb)] | 2.71 kg (5.97 lb) |
| Weight with packaging [kg(lb)] | 3.59 kg (7.91 lb) |
| Typical power consumption [W] | 36.15 W |
| Typical heat dissipation [BTU/hour] | 123.35 BTU/hour |
| Maximum power consumption [W] | 43.3 W |
| Maximum heat dissipation [BTU/hour] | 147.74 BTU/hour |
| Static power consumption [W] | 18.8 W |
| MTBF [years] | 40.61 years |
| Availability | > 0.99999 |
| Noise at normal temperature (acoustic power) [dB(A)] | 46.6 dB(A) |
| Noise at normal temperature (acoustic pressure) [dB(A)] | 34.6 dB(A) |
| Number of card slots | 0 |
| Number of power slots | 0 |
| Number of fans modules | 1 |
| Redundant power supply | Not supported |
| Long-term operating temperature [°C(°F)] | -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.) |
| Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Devices cannot start when the temperature is lower than 0°C (32°F). The operating temperature ranges from –5°C (23°F) to +45°C (113°F) when optical modules with transmission distances greater than or equal to 60 km are used. The device does not support dying gasp when the ambient temperature is higher than 40°C (104°F). |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | 0–5000 m (0–16404 ft.) |
| Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
| Power supply mode | AC built-in |
| Rated input voltage [V] | AC input: 100–240 V AC; 50/60 Hz |
| Input voltage range [V] | AC input: 90 V AC to 264 V AC; 45 Hz to 65 Hz |
| Maximum input current [A] | 1.6 A |
| Memory | 2 GB |
| Flash memory | Physical space: 1 GB |
| Console port | RJ45 |
| Eth Management port | Not supported |
| USB | Not supported |
| RTC | Not supported |
| RPS input | Not supported |
| Service port surge protection [kV] | Common mode: ±7 kV |
| Power supply surge protection [kV] | Differential mode: ±6 kV; common mode: ±6 kV |
| Ingress protection level (dustproof/waterproof) | IP20 |
| Types of fans | Built-in |
| Heat dissipation mode | Air cooling for heat dissipation, intelligent fan speed adjustment |
| Airflow direction | Air intake from left and air exhaust from right |
| PoE | Not supported |
| Certification | EMC certification Safety certification Manufacturing certification |
| Item | Details |
|---|---|
| Description | S5735-L48T4S-A-V2 (48*10/100/1000BASE-T ports, 4*GE SFP ports, AC power, Specially protected models) |
| Part Number | 98012033-001 |
| Model | S5735-L48T4S-A-V2 |
| First supported version | V600R024C10 |
1 | Forty-eight 10/100/1000BASE-T ports | 2 | Four 1000BASE-X ports |
3 | One console port | 4 | One MODE button |
5 | One PNP button NOTICE: To restore the factory settings and reset the switch, hold down the button for at least 6 seconds. To reset the switch, press the button. Resetting the switch will cause service interruption. Exercise caution when you press the PNP button. | 6 | Ground screw NOTE: It is used with a ground cable. |
7 | Jack for AC power cable locking strap NOTE: The AC power cable locking strap is not delivered with the switch. | 8 | AC socket NOTE: It is used with an AC power cable. |
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. | Ethernet cable |
| 1000BASE-X port | SFP | A 1000BASE-X port can send and receive data at 1000 Mbit/s. |
|
| Console port | RJ45 | The console port is connected to a console for on-site configuration. | Console cable |
The S5735-L48T4S-A-V2 has similar indicators to those on the S5735-L48P4XE-A-V2 except that the S5735-L48T4S-A-V2 does not have a PoE mode indicator. For details, see the S5735-L48P4XE-A-V2.
The switch has a built-in AC power module and does not support pluggable power modules.
The switch has a built-in fan for forced air cooling. Air flows in from the left side, and exhausts from the right side.
When working properly at a normal temperature, the device meets the desktop-class noise requirements. However, the fan speed may be high and the noise may be loud during device startup.
This figure only shows the airflow direction and does not depict the actual device.
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] | Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.) |
| Chassis height [U] | 1 U |
| Chassis material | Metal |
| Weight without packaging [kg(lb)] | 2.71 kg (5.97 lb) |
| Weight with packaging [kg(lb)] | 3.59 kg (7.91 lb) |
| Typical power consumption [W] | 36.15 W |
| Typical heat dissipation [BTU/hour] | 123.35 BTU/hour |
| Maximum power consumption [W] | 43.3 W |
| Maximum heat dissipation [BTU/hour] | 147.74 BTU/hour |
| Static power consumption [W] | 18.8 W |
| MTBF [years] | 40.61 years |
| Availability | > 0.99999 |
| Noise at normal temperature (acoustic power) [dB(A)] | 46.6 dB(A) |
| Noise at normal temperature (acoustic pressure) [dB(A)] | 34.6 dB(A) |
| Number of card slots | 0 |
| Number of power slots | 0 |
| Number of fans modules | 1 |
| Redundant power supply | Not supported |
| Long-term operating temperature [°C(°F)] | -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.) |
| Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Devices cannot start when the temperature is lower than 0°C (32°F). The operating temperature ranges from –5°C (23°F) to +45°C (113°F) when optical modules with transmission distances greater than or equal to 60 km are used. The device does not support dying gasp when the ambient temperature is higher than 40°C (104°F). |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | 0–5000 m (0–16404 ft.) |
| Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
| Power supply mode | AC built-in |
| Rated input voltage [V] | AC input: 100–240 V AC; 50/60 Hz |
| Input voltage range [V] | AC input: 90 V AC to 264 V AC; 45 Hz to 65 Hz |
| Maximum input current [A] | 1.6 A |
| Memory | 2 GB |
| Flash memory | Physical space: 1 GB |
| Console port | RJ45 |
| Eth Management port | Not supported |
| USB | Not supported |
| RTC | Not supported |
| RPS input | Not supported |
| Power supply surge protection [kV] | Differential mode: ±6 kV; common mode: ±6 kV |
| Ingress protection level (dustproof/waterproof) | IP20 |
| Types of fans | Built-in |
| Heat dissipation mode | Air cooling for heat dissipation, intelligent fan speed adjustment |
| Airflow direction | Air intake from left and air exhaust from right |
| PoE | Not supported |
| Certification | EMC certification Safety certification Manufacturing certification |
Hot Tags :
Huawei Switches
hot products
Register Email now for Weekly Promotion Stock
100% free, Unsubscribe any time!
Add 1: Room 605 6/F FA YUEN Commercial Building, 75-77 FA YUEN Street, Mongkok KL, HongKong Add 2: Room 405, Building E, MeiDu Building, Gong Shu District, Hangzhou City, Zhejiang Province, China
Whatsapp/Tel: +8618057156223 Tel: 0086 571 86729517 Tel in HK: 00852 66181601
Email: [email protected]
English
Pусский
Français
Español
Português
